Optocoupler 2 Level Channel Relay with Trigger Low and Module High Isolation


฿69 ฿47

หากคุณกำลังมองหาเครื่องมือไฟฟ้าและเครื่องมือช่างหรืออื่นๆ ลองแวะเยี่ยมชมสินค้านี้ดูก่อน ร้านค้า bestchoices.th (bestchoices.th) บน Shopee จำหน่ายสินค้านี้ไปแล้วกว่า 29 ชิ้น และมีรีวิวจากผู้ซื้อกว่า 5/5 คะแนน เชิญแวะชมรายละเอียดสินค้าและรีวิวก่อนได้ค่ะ

  • ขายแล้วมากกว่า 29 ชิ้น
  • ชื่นชอบมากกว่า 6 ครั้ง
  • ส่งจาก ต่างประเทศ


Feature:
The module adopts high-quality relays with normal interface and maximum load: AC 250V/10A, DC 30V/10A.
Using SMT optocoupler isolation, it has strong driving ability and stable performance; trigger current is 5mA;
Modules can be triggered by setting high or low levels through wire jumper.
Fault-tolerant design, even if the control line is broken, the relay will not move.
The interface design is humanized. All interfaces can be directly connected through the terminal, which is very convenient.
Equipped with 4 fixed screw holes, easy to install.
Specification:
Working voltage: 5V, 12V, 24V(Optional)
Max load: AC 250V/10A; DC 30V/10A
Channel: 2
Product dimension: 50*41*18.5mm / 2*1.6*0.7in
Power light: Green
Relay light: Red
Board color: Red
Package List:
1 * Relay Module
Note:
Module interface:
1. DC+: Connect the positive pole of the power supply
2. DC-: Connect power supply negative pole
3. IN1:1 signal trigger terminal, can set high or low level control relay suction
4. IN2:2 signal trigger terminal, can set high or low level control relay suction
Relay output:
1. NO1: 1 channel relay usually opens the interface. The relay is suspended before suction and short-connected with COM1 after suction.
2. COM1: 1 channel relay common Interface
3. NC1: 1 channel relay normally closed interface, short connection with COM1 before relay suction, suspension after suction
4. NO2: 2 channel relay often opens interface. The relay is suspended before suction, and is short-connected with COM2 after suction.
5. COM2: 2 channel relay common interface
6. NC2: 2 channel relay normally closed interface, short Connection with COM2 before relay suction, suspension after suction.
High and low level trigger selector:
1. S1 is the trigger selection of high and low level relay.
2. S2 is the trigger selection of 2-way relay at high and low levels.
3.com and low short connection, the corresponding relay is low-level trigger, com and high short connection is high-level trigger.



ข้อมูลสินค้า รายละเอียดสินค้าและรูปภาพสินค้าจากร้าน bestchoices.th บนช้อปปี้ ก่อนการตัดสินใจซื้อสินค้า กรุณาตรวจสอบรายละเอียดสินค้าให้แน่ใจอีกครั้งในช่องทางการสั่งซื้อของผู้ขายเนื่องจากข้อมูลสินค้า ราคา รวมถึงรูปภาพสินค้าและรายละเอียดโปรโมชั่นหรืออื่น ๆ ภายในเว็บไซต์นี้อาจล้าสมัยไม่อัพเดทในช่วงเวลาหนึ่ง ซึ่งผู้ขายอาจมีการปรับเปลี่ยนเงื่อนไขของสินค้าหรือข้อเสนอต่าง ๆ ไปได้ เงื่อนไขและข้อกำหนดในการคุ้มครองเมื่อสั่งซื้อสินค้าเป็นไปตามเงื่อนไขของแพลตฟอร์มนั้น ๆ เมื่อทำรายการสั่งซื้อ

คุณอาจอยากเลือกชมสินค้าเหล่านี้